81
Using the Browser
The WAP (Wireless Application Protocol) browser provides
services (such as database access) to the terminal. Check
with your Service Provider for the availability of this feature.
Icons
Entering/Exiting the Browser
Enabling Browser Entry
If the Service Provider configured the
browser feature in your terminal, the
Browser option will be listed third in the
main menu.
If not, the Security option will be listed third.
Entering/Exiting the Browser
1. Set Packet Data to Voice & Data or Data Only (see
“Setting Up the Data Function” on page 121).
2. From the main menu, press Menu and select Browser.
3. The display shows one of the following:
• Clear screen (first-time activation after power up), then
your home page.
WAP is only available on the Master Control Head in the Dual
Control Head configuration. User working on Slave Control
Head by pressing can only end the WAP session.
Icon Description
Browsing via Wireless Transport Security
(WTLS) to https://... site
In non-secure browser session, the Packet Data icons are
displayed. (See “Status Icons” on page 12.)
Messages
Contacts
Browser
Setup
More...
Back
Select
Main Menu
To Next Page
Loading...
