22
Home Display Text Message
Your MTM800E is provided with a
feature that allows your Service Provider
to send special text messages to your
MTM800E display.
The message is displayed when your
MTM800E is idle.
The message will stay on your MTM800E display until a new
message is received.
If configured by your Service Provider, your MTM800E will
display an internal Home display until another message is
received.
Time & Date
If your Service Provider configured this feature, the
MTM800E shows current time and date on home display.
You can also check time and date, wherever in menu, by
pressing relevant one-touch button.
Check in the menu options whether the Service Provider has
given you the capability of customising time and date settings
(see page 126).
Terminal Disable/Enable
Your MTM800E is provided with a feature that allows your
Service Provider to disable it temporarily in case it is stolen.
When your MTM800E is disabled, no calls can be initiated or
received.
While your MTM800E is disabled, it will look and act like it is
turned Off.
If you try to turn your MTM800E On, when it is disabled, it will
operate as described above.
If your MTM800E is found, your Service Provider can re-
enable it. After your MTM800E is re-enabled, you may
resume normal operation.
<Home display
text>
Contcs
Optns
To Next Page
Loading...
