63
3. The call ends after a pre-programmed time, or if you
press .
Receiving a DMO Private Call
When a DMO Private Call is received,
the call is started immediately without
need to accept it by the called party.
1. Press PTT to talk back and start
talking.
2. The call ends after a pre-programmed
time, or if you press .
Dialing on Receiving a Call
Dialing process is not changed for the Group Call. Otherwise
display is changed accordingly to the incoming call type and
after the call display returns to where the dialing process was
left.
There is no presence check for Private Calls in DMO. This
means you don’t know whether the called party is available
when you starts the call.
If the called party presses the DMO private call is
suspended for a specified time and in case the calling party is
still transmitting the call is joined again.
When an Emergency Call is received, then dialing is aborted
and Emgcy In Use display appears.
To Next Page
Loading...
