MTM800E
Quick Reference Guide
Turning the MTM800E On/Off
To power the MTM800E on/off, press and
hold or the On push button.
Using the MTM800E Menu System
• To enter the menu, press the Menu
button.
• To scroll through the menu, press / .
• To select a menu item, press Select soft
key or .
• To return to previous level, press Back or
.
• To exit the menu items, press .
Selecting Trunked/Direct Mode
Operation
• Your terminal may be configured with a
One-touch button to switch between
TMO/DMO. Contact your Service
Provider for more information.
• From the Home display press Optns,
select Trunked Mode/Direct Mode.
Making a TMO Group Call
From the Home display navigate to the
desired group. Press Select soft key (if
configured). Press and hold PTT. Wait for
the talk permit tone (if configured) and talk.
Release PTT to listen.
Making a DMO Group Call
Enter DMO. Navigate to the desired group.
Press Select soft key (if configured). Press
and hold PTT. Wait for the talk permit tone
(if configured) and talk. Release PTT to
listen.
Making a TMO Emergency Group Call
Enter TMO. Press and hold the Emergency
button. Emergency alarm is sent
automatically. Press and hold PTT. Wait for
the talk permit tone (if configured) and talk.
Release PTT to listen. If using “Hot Mic”
feature, wait for the Emgncy Mic On
message to appear on the display and talk
without pressing PTT.
To exit Emergency Mode, press and hold
Exit soft key.
Making a DMO Emergency Group Call
Enter DMO. Press and hold the Emergency
button. Press and hold PTT. Wait for the
talk permit tone (if configured) and talk.
Release PTT to listen. To exit Emergency
Mode press and hold Exit soft key.
Making a TMO Simplex Private Call
From the Home display dial a number.
Press CType to select the call type. Press
and release PTT. Ringing sounds. Called
party answers. Wait for the called party to
finish speaking. Press and hold PTT. Wait
for the talk permit tone (if configured) and
talk. Release PTT to listen. Press
to
terminate call.
Making a DMO Simplex Private Call
Enter DMO. From the Home display dial a
number. Press and hold PTT. Wait for the
talk permit tone (if configured) and talk.
Release PTT to listen. Press
to
terminate call.
Making a Full-duplex Private Call/Phone/
PABX Call
From the Home display dial a number.
Press CType to select the call type. Press
and release . Ringing sounds. Called
party answers. Press
to terminate call.
Answering a Call
Your MTM800E switches to the incoming
call and alerts you of the incoming call. To
answer the call, press
for Phone/
PABX/Full-duplex Private calls or press
PTT for all other calls.
Rotary Knob/
Power On
Display Icons
Menu Key
On-Off/End/Home
Key
LED
Alphanumeric
Keypad
Alphanumeric
Display
Emergency
Button
Microphone/
Handset
Connector
Soft Keys
Send Key
Navigation Key
Programmable
Keys
To Next Page
Loading...
