EasyManua.ls Logo

Motorola MTM800E - Browser Menu Pane Contents

Motorola MTM800E
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
78
Silent Emergency and TMO/DMO Mode
As the Silent Emergency is only available in TMO, radio will
change the mode from DMO to TMO. When the user is in a
private or group call, Silent Emergency waits until any of the
calls is ended to change the mode and enter the Silent
Emergency Mode.
Power off in Silent Emergency mode
If user initiates the power off while in Silent Emergency mode
the radio goes to pseudo power off state. In this state audio
and visible indications are turned off but the radio is still on in
the Silent Emergency mode as before.
Power on in pseudo power off
User presses the Emergencey button, the radio indicates
power on but it is still in Silent Emergency mode.
Silent Emergency mode and PIN protect
The radio enters the Silent Emergency mode while in the PIN
protected state, it asks the user for the unlocking code. When
the radio exits the Silent Emergency mode, it is still in the PIN
protected state.
Emergency in DMO
Overview
You can initiate an Emergency Group Call to a group.
You can receive an Emergency Group Call:
From the selected talkgroup
From other users within talkback range (if configured by
your Service Provider). This is called an InterMNI call.
If the Silent Emergency mode enters after the call the only
change on the display is the Private/Group notice which
disappears.
If the radio exits the Silent Emergency mode after powering off in
it, the radio shuts down without any indication.

Table of Contents

Related product manuals