19
To use the one-touch feature:
• Press and hold the required key for a few seconds.
Your MTM800E displays the number and act according to the
programmed feature.
One-touch Private Call is set by the Service Provider.
1. If it is set to Simplex, then outgoing Private Call is Simplex
too.
2. If it is set to Duplex, then outgoing Private Call can be
duplex in TMO, Simplex in DMO with the last Group Call
Originator number.
3. If it is set to Duplex, then outgoing Private Call can be
duplex in TMO and cannot be initiated in DMO when the
phone book index is required.
Initiate Fallback Alert Sends Fallback Alert
RUI Log On/Off Logs on/off the user
Display OPTA Displays Operative Tactival Address
BSI Encryption Toggles on/off encryption
Speaker Enable/
Disable Per Call
Toggles on/off the speaker
RMS Mode* Toggles on/off RMS feature
*) Applicable only for the
and keys.
If programmable one-touch keys are enabled, one-touch dial is
disabled (see page 67).
The required time you need to press the assigned keys to
activate a one-touch function is set as default to 1 second. This
time may be set, however, by your Service Provider.
For information on the function assigned to each assigned key,
please refer to your Service Provider.
Feature Description
To Next Page
Loading...
