24
that feature, please enable the gateway option in your
MTM800E (see Gateway/Repeater Selection” on page 49.).
Entering TMO or DMO
Enter TMO or DMO in one of the following ways:
• From the Home display press Optns and select Direct
Mode
if the MTM800E is in TMO.
• From the Home display press Optns and select Trunked
Mode
if the MTM800E is in DMO.
• Press Menu and select More... > Networks > Trunked
Mode if the MTM800E is in DMO.
• Press Menu and select More... > Networks > Direct
Mode if the MTM800E is in TMO.
• Press the TMO/DMO one-touch button (if programmed by
your Service Provider).
TMO Calls
You can make and receive the following types of calls when
the MTM800E operates in Trunked Mode:
• Group Calls
• Private Calls
• Phone Calls
• PABX Calls
– local (office) extension calls
• Emergency Calls
DMO Calls
You can make and receive Group Calls when the MTM800E
operates in Direct Mode (DMO). This includes Emergency
Group and Private Calls.
The MTM800E returns to the Home display when there is no
activity for a few seconds.
In DMO it is only possible to place Group Calls, Emergency
Group Calls and Private Simplex Calls.
Your terminal can alert you of an incoming call. Select the alert
settings in the Tones menu items.
To Next Page
Loading...
