4-20 Computer Group Literature Center Web Site
Functional Description
4
Remote Status and Control
The remote status and control connector, J6, is a 20-pin connector located
behind the front panel of the MVME162P4. It provides system designers
with flexibility in accessing critical indicator and reset functions. When the
board is enclosed in a chassis and the front panel is not visible, this
connector allows the Reset, Abort, and LED functions to be extended to
the control panel of the system, where they are visible. Alternatively, this
allows a system designer to construct a
RESET/ABORT/LED panel that can
be located remotely from the MVME162P4.
To Next Page
Loading...
