Remote Reset Connector - J6
http://www.motorola.com/computer/literature 5-3
5
Remote Reset Connector - J6
The MVME162P4 has a 20-pin connector (J6) mounted behind the front
panel. When the MVME162P4 board is enclosed in a chassis and the front
panel is not visible, this connector enables you to extend the reset, abort
and LED functions to the control panel of the system, where they remain
accessible.
Table 5-2. Remote Reset Connector J6 Pin Assignments
1 P5VF LANLED∗ 2
3P12VLED∗ SCSILED∗ 4
5VMELED∗ No connection 6
7 RUNLED∗ STSLED∗ 8
9FAILSTAT∗ No connection 10
11 SCONLED∗ ABORTSW∗ 12
13 RESETSW∗ GND 14
15 GND GPIO1 16
17 GPIO2 GPIO3 18
19 No connection GND 20
To Next Page
Loading...
