Motorola MVME162P-344SE - Table 5-1. Industrypack Interconnect Signals

5-2 Computer Group Literature Center Web Site
Pin Assignments
5
For external cabling to the IP modules, four 50-pin IDC connectors
(module A, J8; module B, J7; module C, J27; module D, J26) are provided
behind the MVME162P4 front panel. The pin assignments are the same for
both types of connector.
Table 5-1. IndustryPack Interconnect Signals
1GND CLK 2
3 RESET∗ IPD0 4
5 IPD1 IPD2 6
7 IPD3 IPD4 8
9 IPD5 IPD6 10
11 IPD7 IPD8 12
13 IPD9 IPD10 14
15 IPD11 IPD12 16
17 IPD13 IPD14 18
19 IPD15 BS∗ 20
21 BS1∗ –12V 22
23 +12V +5V 24
25 GND GND 26
27 +5V R/W∗ 28
29 IDSEL∗ DMAREQ0∗ 30
31 MEMSEL∗ DMAREQ1∗ 32
33 INTSEL∗ DMACK∗ 34
35 IOSEL∗ No Connection 36
37 IPA1 DMAEND∗ 38
39 IPA2 ERROR∗ 40
41 IPA3 INT_REQ0∗ 42
43 IPA4 INT_REQ1∗ 44
45 IPA5 STROBE∗ 46
47 IPA6 ACK∗ 48
49 No Connection GND 50