Modifying the Environment
http://www.motorola.com/computer/literature 3-21
3
IP D/C/B/A Interrupt 1 Control = 00000000?
Define the interrupt control requirements for the IP modules, channel 1:
!
Caution
If you have specified environmental parameters that will
cause an overlap condition, a warning message will appear
before the environmental parameters are saved in NVRAM.
The important information about each configurable element in
the memory map is displayed, showing where any overlap
conditions exist. This allows you to quickly identify and
correct an undesirable configuration before it is saved.
If an undesirable configuration already exists, you may wish to restore the
factory defaults with env;d <CR>.
Bits IP Register Address
31-24 D FFFBC017
23-16 C FFFBC015
15-08 B FFFBC013
07-00 A FFFBC011
To Next Page
Loading...
