What to do if Motorola R-2001A has no generated output?
If your Motorola Measuring Instruments is producing no output, remove the RF cable between the RF Synthesizer (A5) and the RF Input module (A11). Check for a nominal -10 dBm level at the Synthesizer output. If there's no output, replace the RF Synthesizer. If the Synthesizer output is okay, replace the RF Input module.
How to fix no Frequency Modulation on Motorola R-2001A?
To resolve the absence of frequency modulation on your Motorola Measuring Instruments, check for a modulation signal at pin 56 of the RF Synthesizer (A5). If the signal is okay, replace the RF Synthesizer.
What to do if Motorola Measuring Instruments internal wattmeter is in error?
If the internal wattmeter on your Motorola Measuring Instruments is showing errors, replace the RF Input module (A11).
What to do if more than one key is inoperative on Motorola Measuring Instruments?
If multiple keys on your Motorola Measuring Instruments are not working or have the wrong effect, replace the Processor Module (A9).
What to do if only one key is inoperative on Motorola R-2001A Measuring Instruments?
If only one key is not working on your Motorola Measuring Instruments, replace the defective key switch.
General| Brand | Motorola |
|---|---|
| Model | R-2001A |
| Category | Measuring Instruments |
| Language | English |
To Next Page
