EasyManuals Logo

Motorola RFS7000 Series Troubleshooting Guide

Motorola RFS7000 Series
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
Network Events
3-2
6 AP adopt failure
[acl disallow]
This event and message is currently not
configured. It will be configured in the next
service release.
Not applicable.
7 AP adopt failure
[limit exceeded]
Access port <XX> was not adopted because
maximum limit has been reached.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
8 AP adopt failure
[license disallow]
License denied access port <XX> adoption.
Maximum access ports allowed with
current license = <YY>.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
YY = License Level (integer).
9 AP adopt failure
[no image]
Access port with MAC <XX> can not be
adopted because no valid firmware image
file can be found.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
10 AP status [offline] Access port <XX> with MAC address <YY>
is unavailable.
XX = Name (string) of the access port.
<YY> = MAC (xx:xx:xx:xx:xx:xx) address of
the access port.
Taking access port <XX> with MAC address
<YY> offline.
XX = Name (string) of the access port.
<YY> = MAC (xx:xx:xx:xx:xx:xx) address of
the access port.
11 AP status [alert] Access port <XX> with MAC address <YY>
is in Alert status due to country not set.
XX = Access port name (string).
YY = Access port MAC (xx:xx:xx:xx:xx:xx)
address.
Access port <XX> with MAC address <YY>
is in Alert status.
XX = Access port name (string)
<YY> = Access port MAC (xx:xx:xx:xx:xx:xx)
address.
12 AP status
[adopted]
Adopted an access port <XX>. XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
Radio <XX> with Mac <YY> is adopted. XX = Access port name (string).
YY = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
13 AP status [reset] Radio <XX> with MAC <YY> was reset. XX = Name (string) of the radio.
YY = MAC (xx:xx:xx:xx:xx:xx) address of the
radio.
Reset the access port <XX>. XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
14 AP config failed
[wrong ESS]
Radio <XX> <YY> no ESS - configuration
FAIL.
XX = Name (string) of the radio.
YY = MAC (xx:xx:xx:xx:xx:xx) address of the
radio.
15 AP max MU count
reached
MUs for this RF port are over margin: <XX>. XX (integer ) = Number of MUs associated
to this access port.
3.1 Network Event Message/Parameter Description Lookup
ID Event Message Parameters

Table of Contents

Other manuals for Motorola RFS7000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola RFS7000 Series and is the answer not in the manual?

Motorola RFS7000 Series Specifications

General IconGeneral
BrandMotorola
ModelRFS7000 Series
CategorySwitch
LanguageEnglish

Related product manuals