About this Guide
Introduction
This guide provides information about using the RFS7000 Series RF Switch.
Documentation Set
The documentation set for the RFS7000 Series RF Switch is partitioned into the following guides to provide information for
specific user needs.
•
RFS7000 Installation Guide - describes the basic setup and configuration required to transition to more advanced
configuration of the switch.
•
RFS7000 CLI Reference - describes the Command Line Interface (CLI) and Management Information Base (MIB)
commands used to configure the RFS7000 Series RF Switch.
•
RFS7000 Troubleshooting Guide - describes workarounds to known conditions the user may encounter.
Document Conventions
The following conventions are used in this document to draw your attention to important information:
NOTE Screens and windows pictured in this guide are samples and can differ from actual screens.
NOTE Indicate tips or special requirements.
CAUTION Indicates conditions that can cause equipment damage or data loss.
WARNING! Indicates a condition or procedure that could result in personal injury or equipment damage.
!
To Next Page
Loading...
Need help?
General
