Need help?Do you have a question about the Motorola APEX1000 and is the answer not in the manual?
Identifies special symbols used on the equipment and in documentation.
Details the APEX1000's features, including RF ports, VOD/SDV support, and GigE inputs.
Provides channels for technical assistance and learning materials.
Describes the key features and capabilities of the APEX1000.
Lists the physical, electrical, and performance specifications of the APEX1000.
Provides a general overview of the APEX1000's physical characteristics and dimensions.
Describes the 1:1 physical chassis redundancy support.
Outlines the different operational modes supported by the APEX1000.
Details MC encryption and access control capabilities and algorithms.
Lists the items included in the APEX1000 shipment.
Instructions for mounting the APEX1000 into a standard 19-inch rack.
Instructions for connecting AC and DC power to the APEX1000.
Lists the hardware and software requirements for the APEX1000 Element Manager.
Procedure for logging into the APEX1000 EM application.
Explains how to manage user accounts and privileges within the system.
Lists common system tasks available to all users.
Covers essential initial configuration settings for the APEX1000.
Detailed steps for configuring chassis redundancy.
Configuration settings for RADIUS authentication.
Settings for configuring QAM transmission modes and parameters.
Configuration settings for GigE interfaces.
Procedure for configuring active mappings for programs.
Enables secondary GigE input stream configuration for each input.
Describes routing streams under external controller control using RPC, RTSP, or MHA.
Configuration for RPC mode, mapping GigE inputs to QAM output channels.
Introduction to DVB SimulCrypt support for third-party CA integration.
General configuration for SimulCrypt communication.
Provides information on EMM streams active in the SimulCrypt network.
Defines parameters controlling DOCSIS frame delivery from M-CMTS to EQAM.
Defines mapping parameters for DEPI interface session data transfer.
Represents monitored conditions in the APEX1000 with status levels.
Provides read-only information on APEX1000 hardware and software versions.
Displays a read-only table of hardware errors.
Gathers redundancy status from heartbeat messages between APEXs.
Registers all Program Mappings and Ancillary PID Remapping errors.
Provides contact information for Motorola Technical Assistance Center.
Table of LED/Error conditions, causes, and corrective actions.
Provides the physical dimensions of the APEX1000 unit.
Provides specifications for Ethernet, RS-232, and RF cabling.
Lists and describes hardware-related alarms.
Alarms associated with RF redundancy status.
Describes BOOTP and no BOOTP configuration modes.
Steps to remove a fan from the APEX1000.
Details APEX1000's support for dual hot-swappable redundant power supplies.
How to access menus and perform actions using the console interface.
Access to various parameters and functions from the root menu.
Lists common acronyms and abbreviations used in the manual.
Provides definitions for key terms used in the document.
To Next Page
General
