B
SDV — Switched Digital Video Controls • RTSP Controller Configuration
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
170
573408-001-a
RTSP Events
This window shows the read-only status of QAM modules, controllers, and interfaces:
Figure 8-10 — RTSP Events
RTSP Events window field definitions
Item Definition
Index
Shows an index for the event.
Note: A maximum of 100 events can be logged.
Time Logged
Shows a timestamp of when the event occurred.
Controller IP
IP address of the controller which generated the event – external IP or 0.0.0.0 if the
event was generated by an internal task.
Session Count
Number of sessions that were active at the time of the event.
Source
Description
Identifier for the Source of the event (external controller or internal task).
Event
Description
Text description of the event.
To Next Page
Loading...
Need help?
General
