B
SimulCrypt • EIS Configuration
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
200
573408-001-a
External EIS Configuration
Select this mode to configure the connectivity for the existing device in the SimulCrypt
network, acting as the EIS entity and performing the scrambling provisioning.
Figure 10-9 — External EIS Configuration
Note: You must the must reboot APEX for an EIS mode change to take effect.
External EIS Configuration window field definitions
Item Definition/Range
EIS TCP Port
Specifies the local TCP server port to be used to communicate with the event
scheduler entity (EIS).
To Next Page
Loading...
