B
Manual Routing • Manual Routing TS Redundancy
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
153
573408-001-a
Data Stream Identification
Use this window to identify specific GigE input streams as containing data PIDs only.
These input streams do not contain PCRs, which are used to derive the play out data
rate of video/audio streams.
For streams that are purely data only, identify each stream with an entry in this screen;
the APEX will then attempt to buffer and smooth out these streams to avoid overflows.
Data streams NOT identified in this screen will be played out of the GigE through the
APEX at the rate they are received.
Figure 7-7 — Data Stream Identification
CAUTION GigE streams may encounter network jitter, and the streams can cause overflows of the
GigE buffers without proper identification and buffering. This will cause loss of data and
packets.
To Next Page
Loading...
Need help?
General
