B
Setup and Operation • APEX1000 EM Toolset
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
47
573408-001-a
APEX1000 EM Toolset
The APEX1000 EM is the primary interface to the APEX1000 for set-up and operation.
Based on a Java application, it is a remote user interface that enables you to monitor an
APEX1000 (remotely or locally).
To allow access to other windows, the software toolset has seven drop-down menus:
• System — Provides menu options to reboot the APEX1000, manage users and
passwords, obtain information about the APEX1000, download configuration files, or
exit the Element Manager application.
• Configuration — Provides dialogs to define initial APEX1000 System parameters, as
well as the configuration of the following functions:
Chassis Redundancy
DTA
RADIUS
EAS
PSIP
GigE
QAM
QAM RF Redundancy
Encryption
Output TS
• Manual Routing — Provides dialogs to configure Program Mapping, UDP Mapping,
Stream Pass Thru, Ancillary PID Mapping, Input Stream Redundancy, and Data
Stream Identification. (A shortcut to quick enabling/disabling of selected features is
also available from this tab.)
• SDV — Provides dialogs to configure Session Control and view QAM Status.
Additionally, you can use this tab to configure Controller/GigE Group and view QAM
Status and Events.
• SimulCrypt — Provides dialogs to configure SimulCrypt, EMMG, and SCS-ECMG
parameters. You can also access this tab to view SimulCrypt Events and EMMG,
ECMG, and EIS Statistics.
• DEPI — Use to configure DEPI Control Connections and Session Mapping.
• Status — Provides the capability to view and save the status of different functions
to a text file.
To Next Page
Loading...
