Motorola APEX1000 - System Configuration; System Time; Figure 6-1 - System Time Configuration

B
Configuration • System Configuration
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
61
573408-001-a
System Configuration
System Time
Use this window to define the system time source and view the current APEX1000 up
time. You can select between SNTP and Internal as the time source. SNTP can be either
from a specific SNTP server, or the APEX1000 can ‘listen’ for any SNTP server.
To configure system time, select Configuration > System Configuration. The System
Configuration window opens in the default System Time tab:
Figure 6-1 — System Time Configuration