B
Status • Reports
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
231
573408-001-a
RDS Status
The RDS Status window displays information about the current and past encryption
modes, as well as the current program epoch:
Figure 12-10 — RDS Status
RDS Status window field definitions
Item Definition/Range
GPS Time
Shows the GPS time of the state transition.
CSN
Displays the current server CSN (Category Sequence Number) in use.
State
Shows the current state of the transition.
Values are:
• Transition Complete
• Transition Start
• Start of New Epoch
ACP Address
This is the address of the Access Control Processor (ACP) associated with the
error reported by the Rights Data Server in the RDS Error column.
Note: If no address is contained in this entry, the error reported applies to all
ACPs or to the entire APEX1000.
To Next Page
Loading...
Need help?
General
