B
Status • Reports
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
225
573408-001-a
Hardware Events
The Hardware Event Log window provides a read-only table of hardware errors:
Figure 12-5 — Hardware Event Log
Note: A maximum of 100 errors can be recorded and displayed.
Hardware Event Log window field definitions
Item Definition
Index
Index of hardware error table entry.
Time Logged
Shows system up time when the error was logged. A zero demonstrates that the
error occurred at startup.
Type
Indicates the type of hardware event.
Severity
Indicates the level of severity of the event.
Event Data
Applicable to errors that are issued for multiple inputs, outputs, output transport
streams, etc. Also used to indicate the input port, output port, or output transport
stream to which the error applies.
A zero in this area indicates that:
• The error does not use this parameter
or
• The APEX1000 cannot determine the port or stream number for the error
or
• The APEX1000 is not supporting this parameter for the error
Description
Provides a text description of the error.
To Next Page
Loading...
Need help?
General
