Motorola APEX1000 - Motorola RADIUS Dictionary File

B
Configuration • RADIUS Authentication
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
94
573408-001-a
Motorola RADIUS Dictionary File
APEX100 firmware includes a dictionary file that includes RADIUS attribute value pairs
defining user access levels:
• The Motorola-APEX1000-User-Access-Level is an APEX-specific user access level.
• The Motorola-DVS-User-Access-Level is applicable to all Motorola headend devices.
Either AVP must be configured on the RADIUS server.
If both AVPs are present, the level configured for the APEX specific attribute takes
precedence.
Note: The Motorola dictionary file is bundled with all firmware releases that support
RADIUS. For information on downloading the file at a later time, see
Downloading the
Motorola Dictionary File.
Dictionary File Sample
Below is a sample of the motdict.htm file:
VENDOR Motorola 161
BEGIN-VENDOR Motorola
ATTRIBUTE Motorola-DVS-User-Access-Level 105 integer
VALUE Motorola-DVS-User-Access-Level Motorola-
Administrator 15
VALUE Motorola-DVS-User-Access-Level Motorola-Operator
7
VALUE Motorola-DVS-User-Access-Level Motorola-Monitor
0
ATTRIBUTE Motorola-APEX1000-User-Access-Level 107
integer
VALUE Motorola-APEX1000-User-Access-Level Motorola-
Administrator 15
VALUE Motorola-APEX1000-User-Access-Level Motorola-Operator
7
VALUE Motorola-APEX1000-User-Access-Level Motorola-Monitor
0
END-VENDOR Motorola