Motorola RFS7000 Series Troubleshooting Guide

Network Events
& Kern Messages
This chapter includes two network event tables to provide detailed information and understanding of the
RFS7000 Series RF Switch network events that can occur. These tables are:
• Network Event Message/Parameter Description Lookup
• Network Event Course of Action Lookup
• KERN Messages
3.1 Network Event Message/Parameter Description Lookup
ID Event Message Parameters
0 License number
change
Changed license level from <XX> license
number access ports to <YY> number
access ports.
XX = previous license number (an integer)
YY = new license number (an integer)
1 Clock change The Wireless Switch clock was changed
<XX>/ <YY> seconds.
XX = + or -
YY = offset in seconds (an integer)
2 Packet discard
[wrong NIC]
Discarded Packet: Wrong NIC <XX> <XX> vs
<YY> from access port ZZ.
XX = Ethernet port that received the packet
= 1 or 2
YY = Ethernet Port that the access port was
adopted from = 1 or 2
ZZ = MAC (xx:xx:xx:xx:xx:xx) address of the
Access Port
3 Packet discard
[wrong VLAN]
Discarded Packet: Wrong VLAN <XX> <XX>
vs <YY> from access port <ZZ>.
XX = VLAN that received the packet (an
integer).
YY = VLAN the access port was adopted
from (an integer).
ZZ = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
4 AP adopt failure
[general]
Adoption <XX> failed. The MAC address
has been used by an existing access port.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
radio or access port.
5 AP adopt failure
[policy disallow]
Access port policy prevented port with MAC
<XX> from being adopted.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.

Motorola RFS7000 Series Specifications

General

Brand	Motorola
Model	RFS7000 Series
Category	Switch
Language	English