2-2 Test Equipment and Service Aids: Service Aids
2.2 Service Aids
Table 2-2 lists the service aids recommended for working on the radio. While all of these items are
available from Motorola, most are standard workshop equipment items, and any equivalent item
capable of the same performance may be substituted for the item listed.
Table 2-2. Service Aids
Motorola Part
No.
Description Application
CB000262A01 Micro USB Programming Cable Cable connects the radio to a USB port for radio
programming and data applications.
PMKN4128_ Portable Programming Cable
with TTR
Cable connects the radio to a USB port for radio
programming and data applications.
28012039001 RF Antenna Adaptor Adapts radio’s antenna port to test equipment.
HW000406A01 RF Antenna Adaptor Holder Holds the RF antenna adaptor.
HW000405A01 Battery Eliminator Connects to radio via battery eliminator cable.
PMVN4130_ MOTOTRBO CPS, AirTracer
CD
CPS allows Dealers/Distributors to program radio
parameters. AirTracer allows the capturing of
radio traffic into logs for analysis by Motorola.
PMVN4131_ MOTOTRBO Tuner CD This tuner tunes and test MOTOTRBO subscriber,
repeater and base station products in the available
systems.
N/A Flat Square Tip Plastic Tweezer Removes components during disassembly
RLN4460_ Portable Test Set Enables connection to the audio/accessory jack.
Allows switching for radio testing.
CB000233A01 Audio Test Cable This cable connects the radio to RLN4460_Portable
Test Set for test and measurement.
6680702Z01 Opener Back Housing To dismantle the back housing from front housing.
To Next Page
Loading...
