Motorola SL1M - Internal Frame Reassembly

Disassembly And Reassembly Procedures: Radio Reassembly – Detailed 5-19
5.7.5 Internal Frame Reassembly
1. Insert the internal frame into the front housing, with a little slanting to ensure the internal
frame is properly sits on the front housing ribs as shown in Figure 5-26.
Figure 5-26. Internal Frame Reassembly
2. Screw in the internal frame as shown in Figure 5-27, using T06 Torx Plus screwdriver.
Figure 5-27. Internal Frame Screws Reassembly
Do not over torque the screws. Please refer to Table 5-4 for
screws torque specifications.
Housing Rib
Internal Frame
!
C a u t i o n
Final Draft