Motorola SL1M - Main PCB Disassembly

Disassembly And Reassembly Procedures: Radio Disassembly – Detailed 5-11
5.6.4 Main PCB Disassembly
1. Detach the Top Control Flex, PTT Flex, and Display Flex from the main PCB, using plastic
tweezers in the direction indicated in Figure 5-11.
2. Pull the PCB catch backwards as shown in Figure 5-11, and lift the main PCB upwards as
shown in Figure 5-12.
Figure 5-11. PCB Catch Disassembly
Figure 5-12. Uplifting Of The Main PCB
Top Control Flex
PTT Flex
Display Flex
PCB Catch
Final Draft