Chapter 4 Radio Programming and Tuning
4.1 Introduction
This chapter provides an overview of the MOTOTRBO Customer Programming Software (CPS), as
well as the Tuner and AirTracer applications, which are all designed for use in Windows 7 and
Windows 8 environment. These programs are available in one kit as listed in Table 4-1. An
Installation Guide is also included with the kit.
Table 4-1. Software Installation Kits Radio Tuning Setup
4.2 Customer Programming Software Setup
The CPS programming setup, shown in Figure 4-1 is used to program the radio.
Figure 4-1. CPS Programming Setup
NOTE
Refer to the appropriate program on-line help files for the programming procedures.
Description Kit Number
MOTOTRBO CPS, Tuner and AirTracer Applications CD PMVN4130_,
PMVN4131_
NOTE
Refer to the appropriate program on-line help files for the programming procedures.
Computer USB ports can be sensitive to Electrostatic Discharge. Do not touch
exposed contacts on cable when connected to a computer.
Radio
Battery
Micro USB Programming Cable
CB000262A01,
PMKN4128_