Getting Started
23
Removing and Attaching Battery Covers
Your phone’s batteries are shipped uncharged and fitted
with protective covers. To begin using your phone, just
remove the battery cover, install the battery on the phone,
and charge! See “Charging Your Batteries” on page 32
when you’re ready to begin charging your battery.
Save the covers to store and carry unused batteries. The covers
will prevent metal objects from contacting both battery
terminals, reducing the risk of injury or damage from a
battery short circuit.
Removing the Main Battery
Cover
1.
Press and hold the release
latch.
2.
Pull the battery upward, out
of its cover.
Attaching the Main Battery Cover
1.
Set the edge of the bat-
tery opposite the release
latch into the cover.
2.
Lower the release latch
side of the battery into
the cover until the latch
clicks into place.
To Next Page
Loading...
