Phone Book 85
Storing Calling Card Information
Like Pause Dialing, you can store calling card access
numbers, separated by pauses, for easy recall later. You can
also store a Number Character in the sequence to save a
place for the number you will be calling when you use your
calling card.
You can protect your calling card information with your
phone’s security features. See “Lock/Security” on page 108
for more information.
1.
Enter a number. Enter the phone number you use
to access your calling card system, usually an 800
phone number.
Skip this step if you only dial 0.
2.
Press ƒ, then press æ.
You will see Insert Pause o.
3.
Press to insert a pause (o) into the sequence.
4.
Enter the next numbers. If necessary, enter the
next group of numbers.
For example, some long distance carriers require
you to dial a 0 before the number you are calling. If
no further numbers are needed, skip to Step 6.
5.
Press ƒ, then press æ.
6.
Press to scroll to the Number Character.
You will see
Insert Number ‘N.
To Next Page
Loading...
