9-1
Chapter 9
Wand Emulation Interface
Introduction
This chapter covers Wand Emulation host information for setting up your scanner. This
mode is used whenever Wand Emulation communication is needed. The scanner will
attach either to an external wand decoder or to a decoder integrated in a portable terminal
or Point-of-Sale (POS) terminal.
In this mode the scanner emulates the signal of a digital wand to make it "readable" by a
wand decoder.
Throughout the programming bar code menus, default values are indicated with asterisks
(
*).
*Transmit Unknown
Characters
Feature/Option
* Indicates Default
To Next Page
Loading...
