13-31
Advanced Data Formatting
Specific String, Any Location
Scan this bar code, then, using the Numeric Bar Codes on page D-1, scan a two-digit
number representing the position (use a leading “zero” if necessary). Then scan the
desired character or characters (up to a total of 8) on the Alphanumeric Keyboard on page
13-178, followed by the End Of Message bar code on page 13-199.
After scanning the following bar code:
1. Enter a location using the Numeric Bar Codes on page D-1
2. Enter a string using the Alphanumeric Keyboard beginning on page 13-178.
3. Scan End Of Message on page 13-199.
Any Message OK
By not scanning any bar code, all selected code types are formatted, regardless of
information contained.
Specific String Any Location
To Next Page
Loading...
