Motorola Symbol LS9208 - Scan Data Options

12-9
Miscellaneous Scanner Options
Scan Data Options
To change the Scan Data Transmission Format, scan the Scan Options bar code below.
Then select one of four options:
•Data As Is
• <DATA> <SUFFIX>
• <PREFIX> <DATA>
• <PREFIX> <DATA> <SUFFIX>
When you have made your selection, scan the Enter bar code on page 12-11. If you make
a mistake, scan the Data Format Cancel bar code on page 12-11.
If you need to have a carriage return/enter after each bar code scanned, scan the following
bar codes in order:
1. <SCAN OPTIONS>
2. <DATA> <SUFFIX>
3. Enter (on page 12-11)
Scan Options