4-1
Chapter 4
User Preferences
Introduction
You have the option to program the Symbol LS9208 scanner to perform various functions,
or activate different features. This chapter describes each user preference feature and
provides the programming bar codes necessary for selecting these features for your
Symbol LS9208 scanner. Before programming, follow the instructions in Chapter 1, Getting
Started.
The Symbol LS9208 is shipped with the settings shown in the User Preferences Default
Table on page 4-3 (also see Appendix A, Standard Default Parameters for all host device
and miscellaneous scanner defaults). If the default values suit your requirements,
programming may not be necessary.
Features values are set by scanning single bar codes or short bar code sequences. The
settings are stored in non-volatile memory and are preserved even when the scanner is
powered down.
To Next Page
Loading...
