Motorola Symbol LS9208 - Symbology Default Parameters Overview; Configuring UPC;EAN Symbology Settings

11-3
Symbologies
Symbology Default Parameters
Table 11-1 lists the defaults for all symbologies parameters. If you wish to change any
option, scan the appropriate bar code(s) provided in the Symbologies Parameters section
beginning on 11-8.
Note:See Appendix A, Standard Default Parameters for all user
preferences, hosts, symbologies, and miscellaneous default
parameters.
Table 11-1. Symbology Default Table
Parameter Default
Page
Number
UPC/EAN
UPC-A Enable 11-8
UPC-E Enable 11-8
UPC-E1 Disable 11-9
EAN-8/JAN-8 Enable 11-10
EAN-13/JAN-13 Enable 11-10
Bookland EAN Disable 11-11
Decode UPC/EAN Supplementals (2 and 5 digits) Ignore 11-12
Decode UPC/EAN Supplemental Redundancy 20 11-19
Transmit UPC-A Check Digit Transmit 11-20
Transmit UPC-E Check Digit Transmit 11-20
Transmit UPC-E1 Check Digit Transmit 11-21
UPC-A Preamble System Character 11-22