Motorola Symbol LS9208 - Page 201

11-13
Symbologies
• Supplemental User-Programmable Type 1 - applies to EAN-13 bar codes
starting with a 3-digit user-defined prefix. Set this 3-digit prefix using
Supplemental User-Programmable 1.
• Supplemental User-Programmable Type 1 and 2 - applies to EAN-13 bar
codes starting with either of two 3-digit user-defined prefixes. Set the 3-digit
prefixes using Supplemental User-Programmable 1 and Supplemental
User-Programmable 2.
• Smart Supplemental Plus User-Programmable 1 - applies to EAN-13 bar
codes starting with any prefix listed previously or the user-defined prefix set
using Supplemental User-Programmable 1.
• Smart Supplemental Plus User-Programmable 1 and 2 - applies to EAN-13
bar codes starting with any prefix listed previously or one of the two user-
defined prefixes set using Supplemental User-Programmable 1 and
Supplemental User-Programmable 2.
•Select Supplemental User-Programmable 1 to set a 3-digit prefix. Then select
the 3 digits using the numeric bar codes beginning on page D-1.
•Select Supplemental User-Programmable 2 to set a second 3-digit prefix. Then
select the 3 digits using the numeric bar codes beginning on page D-1.
Note:To minimize the risk of invalid data transmission, select either to
decode or ignore supplemental characters.