11-55
Symbologies
Set Lengths for Code 11 (continued)
Length Within Range - This option allows you to decode a Code 11 symbol with a
specific length range. The length range is selected from numeric bar codes beginning
on page D-1 in Appendix D. For example, to decode Code 11 symbols containing
between 4 and 12 characters, first scan Code 11 - Length Within Range. Then scan 0, 4,
1, and 2 (single digit numbers must always be preceded by a leading zero). If you make an
error or wish to change your selection, scan Cancel on page D-5.
Code 11 - Length Within Range
Any Length - Scanning this option allows you to decode Code 11 symbols containing any
number of characters within the scanner capability.
Code 11 - Any Length
To Next Page
Loading...
