Motorola V150 - Phone Power and SIM Card Setup; Completing SIM Card Installation; Powering the Phone On and Off

Getting Started - 21
5 Replace the holder and press and slide it to the left to lock it
into place.
6 Replace the battery and battery cover.
If the SIM card is inserted the wrong way round, or damaged, the

message may be displayed. Remove the SIM card, check
that it is the right way round and then re-insert it into the phone.
If either of the

or

messages are
displayed, then you will need to contact your Cellular Service
Provider.
Switching the Phone On and Off
To switch the phone on or off, press and hold the
P
key. If
VibraCall™ is selected, the phone will vibrate when it is switched
on.
If you switch the phone on and there is no SIM card inserted, you
will be asked to insert one. Once inserted, the phone will check that
the SIM card is valid.