Getting More Out of Your Phone - 95
Your phone can use GPRS network connections when available
(see page 25).
For more information about Motorola Original data kits, see the
Motorola Web site at:
http://www.hellomoto.com
Connecting Your Phone to an External Device
Connect your phone to an external device (such as a computer or
hand-held device) using a USB cable.
Note: Not all devices are compatible with USB cable connections.
Check your external device for specifications.
Set Up a Cable Connection
Attach a Motorola Original USB cable to the phone and external
device as follows.
Note: Your phone requires a mini-USB connector. Check your
computer or hand-held device to determine the type of cable you
need.
Install the Software
Install the software from the CD-ROM that comes with your
Motorola Original data kit. See the data kit’s user guide for more
information.
Do This
1 Plug the end of the cable with the Motorola logo into
your phone’s accessory connector port. Make sure
that the logo and the phone are both facing you.
2 Plug the other end—the USB connection—into the
USB port on the external device.
To Next Page
Loading...
