INSTALLING THE MICROBOOK HARDWARE
19
A TYPICAL MICROBOOK SETUP
Here is a typical MicroBook studio setup.
This rig can be operated without an
external mixer. All mixing and processing
can be done either in the MicroBook, in
the computer with audio software, or
both. During recording, you can use the
MicroBook’s CueMix™ FX mixer to
apply EQ and compression to what you
are recording and monitor it via the main
outs, headphone outs, or any other
output pair. You can control everything
from the included CueMix FX software.
Monitors
Figure 3-5: A typical MicroBook studio setup.
Computer
Mic
Guitar (with or without an amp)
Synthesizer
Home theater
system
Headphones
To Next Page
Loading...
