2
3. Safety Instructions
WARNING: This manual contains important safety and operating instructions. Read this
manual carefully before installations and operations, keep it for future reference.
1. Before using the unit, read all instructions and cautionary markings on the unit, the batteries and all
appropriate sections of this manual.
2. Do not disassemble the unit. Take it to a qualified service center when service or repair is required.
Incorrect re-assembly may result in a risk of electric shock or fire.
3. To reduce risk of electric shock, disconnect all wirings before attempting any maintenance or cleaning.
Turning off the unit will not reduce this risk.
4. CAUTION – Only qualified personnel can install this device with battery.
5. Be very cautious when working with metal tools on or around batteries. A potential risk exists to drop
a tool to spark or short circuit batteries or other electrical parts and could cause an explosion.
6. Please strictly follow installation procedure when you want to disconnect DC terminals. Please refer to
INSTALLATION section of this manual for the details.
7. GROUNDING INSTRUCTIONS -Inverter should be connected to a permanent grounded wiring system.
Be sure to comply with local requirements and regulation to install.
8. NEVER cause AC output and DC input short circuited.
9. Warning!! Only qualified service persons are able to service this device. If errors still persist after
following troubleshooting table, please send this inverter back to local dealer or service center for
maintenance.
To Next Page
Loading...
Need help?
General