MRC PC-6011SD - Data Logger Function

SCREEN 1(5-9) SCREEN 2(5-9)
5-10 Data Logger Function
A:When the START TIME and STOP TIME are set to 00:00 hours
(as SCREEN 1) , press the REC KEY (3-6, Fig.1) once you start doing data
records, more than 30,000 pen will automatically add the file name and
press REC KEY (3-6, Fig.1) and once released data logging(as SCREEN 3).
B:START TIME or STOP TIME, which one is not 00:00 (such as SCREEN 2),
press the REC KEY (3-6 Fig.1) once, the LCD will display the lower left corner
and the REC symbol (as SCREEN 5),real time reaches until START
TIME (08:00) then start doing data logging,real time is reached when the STOP
TIME (00:00) will automatically stop recording, set Repeat this action every
day.when the press REC KEY (3-6, Fig.1) data logging function is released
(as SCREEN 3).
C:When the REC KEY (3-6, Fig.1)> 2 Sec in the first round regardless of when
START TIME setting ,will start doing data records (such as SCREEN 4),
Real time until the arrival STOP TIME (00:00) will automatically stop recording.
after the second round will be based on START TIME and STOP TIME time
setting is used for data recording ,when the press REC KEY (3-6, Fig.1)>
2 Sec is released this data logging function(as SCREEN 3).
Remark:
* If the bottom left shows as " ChangeSD "(SCREEN 6), it indicates the
memory space is already full either or the SD CARD exist some wrong.
* When you press the REC KEY (3-6, Fig.1) If the lower left corner
appears "NO DISK" (SCREEN 7), said not inserted SD CARD.
Then press the REC KEY (3-6, Fig.1) once it is released. "NO DISK "
screen.
SCREEN 1(5-10) SCREEN 2(5-10)
27