MRC PC-6011SD - 4-4.SETUP KEY Description; Setting Function Description before Measuring

4-4.SETUP KEY description:
4-4-1 Setting Feature List:
* Folder Name: Set the expect folder name for Sd Card, the range is between
WTA01 to WTA10.
* File Name: Set the file name for SD CARD, It allows setting 50 filenames in
this function.
* REC Date: Show the recorded time of existing files ( Year/Month/Date,
Hour/Min./Sec. )
* Sampling Time: Set the sampling time from 2 to 7200 seconds.
* Delete File: To delete the existing data from SD CARD.
* SD Format: To Format SD CARD fast.
* PT: Set the potential transformer from 1 to 1000.
* Beep: Set to ON/OFF for buzzer.
* MD: Maximum demand metering setting (1-60 minutes), initially set to
15 minutes.
* AUTO POWER OFF: Set auto power off function.
* Trans Ref: Nominal voltage for transient detection reference.
* SVDP: Set up upper and low limits % of transient voltage detection.
* Decimal: set the Decimal type to USA ( .) or Euro ( , )
* RS232 OUT SEL: RS232 output function setting, maximum output option set to
9
* Temp. Unit: Setting the temperature unit ℃/℉
* START TIME: Data logging, the scheduled start time setting records
* STOP TIME: Data logging, scheduled to end recording time settings
* Year: Set the year.
* Month: Set the month.
* Date: Set the date.
* Hour: Set the hour.
* Minute: Set the minute.
* Second: Set the second.
4-5 Setting function description before measuring
SCREEN 1(4-5) SCREEN 2(4-5)
7