MRC PC-6011SD - Page 11

SCREEN 3(4-5)
A: Press SETUP(ENTER) KEY to enter setting function screen ,total 3 page
(SCREEN 1〜SCREEN 3).
B: The selected item will be displayed in flashing.
4-5-1 Folder Name: Set the folder name for SD
SCREEN 1(4-5-1)
A:Folder Name range: WTA01 to WTA10
B:At this time Folder Name flashes,When you press or key its Folder number
will flash , press ▲ or ▼ KEY choice Folder number, its number from
"01 to 10" (as SCREEN 1)
C: Press ▲ or ▼ KEY> 2 SEC then the number will quickly change
D:Press ◄ or ► KEY will return to Folder Name function, and this was flashing ,
press ▼ KEY then go to the next option as SCREEN 1
(Folder Name → File Name)
4-5-2 File Name: Set the file name for SD
SCREEN 1(4-5-2) SCREEN 2(4-5-2)
A: The screen will show " NO File " indicator in REC Date option when the
selected file is new ( as SCREEN 1 ).
B. The screen will show recording date and time in REC Date option when the
selected file has been recorded (as SCREEN 2).
8