C:When entering the File Name option will flash, then go to File on ◄ or ► KEY
digital adjustment and flashes. press ▲ or ▼ KEY select File numbers, their
numbers from "001-050" (as SCREEN 2)
Remark: Press ▲ or ▼ KEY> 2 SEC then the number will quickly change
* 1P201001 : 1P2 means one phase.
* 3P301001 : 3P3 means three phases.
* HAV01001 : HAV means voltage harmonic measurement.
* HAA01001 : HAA means current harmonic measurement.
* SIN01001 : SIN means voltage & current waveform measurement.
* TRA01001 : TRA means transient measurement.
* TMP01001 : TMP means temprature measurement.
D: Press ◄ or ► KEY will return to File Name function, and this was flashing.
press ▼ KEY then go to the next option as screen 2
(File Name→Sampling Time)
4-5-3 Sampling Time: Set the data logger sampling time for SD
SCREEN 1(4-5-3)
A: When entering the Sampling Time option and is flashing(as SCREEN1).
B: When you press ◄ or ► KEY then enter the digital adjustment and
showed flashes, press ▲ or ▼ KEY can be adjusted.
Remark: Press ▲ or ▼ KEY> 2 SEC then the number will quickly change.
C: Press ◄ or ► KEY then returned Sampling Time function, this time is
flashing , press ▼ KEY then go to the next option (Sampling Time→
4-5-4 Delete File: Delete the files for SD
SCREEN 1(4-5-4) SCREEN 2(4-5-4)
A : When entering the Delete File option and is flashing(as SCREEN1).
9
To Next Page
Loading...
