MRC PC-6011SD - Data HOLD Function; Exit( ) Key; LOWBAT Screen

SCREEN 3(5-11)
5-12 Data HOLD Function
A:In the measurement, press HOLD KEY (3-5, Fig.1) and once the displayed
value remains in the LCD, and the LCD will display the lower left corner for
HOLD symbol (as SCREEN 2).
B:Press HOLD KEY (3-5, Fig.1) once you release the function
SCREEN 1(5-12) SCREEN 2(5-12)
5-13 EXIT( ) KEY
A:In the measurement mode(as SCREEN 1) press EXIT( ) KEY (3-9, Fig.1),
on behalf of control of LCD backlight ON / OFF
B:In setting mode(as SCREEN 2) Press EXIT( ) KEY (3-9, Fig.1), EXIT KEY
represents the exit setting mode.
SCREEN 1(5-13) SCREEN 2(5-13)
5-14 LOWBAT screen
Upper left corner of the LCD display LOWBAT symbols (as SCREEN 1)
SCREEN 1(5-14)
29