3.6 Electrical Connections
WARNING!
Installation should only be carried out by suitably qualified personnel.
Failure to follow this warning can result in serious personal injury or death.
• During installation all relevant codes of practice and National wiring regulations should be complied with
especially in places where there is a risk of explosion and fire. [Classified areas]
• Refer to the MSA controller instruction manual for the sensor connection details.
• Where an earth connection to the junction box/ sensor is required use the earth terminal provided on the outside of
the junction box.
The sensor connections are shown in Section 10 Wiring Diagrams.
GB Series 47K 12
3 Installation
To Next Page
Loading...
Need help?
General
