Fire-fighting Helmets / Preventive care, control
and maintenance
Install the Chinstrap and neck curtain fixture to the shell inserting the 2 lower edges in
the shell clips
Inner paddings assembly
Rigid padding installation (PU)
References GA1058 – Rigid padding F1SF
GA1005K – Comfort padding F1SF
1. Position the rigid padding (step 1).
2. Push it towards the shell to lock it in its position (step 2).
Step 1 : positionning
Step 2 : Locking
Comfort padding assembly (PE)
Position the comfort padding and lock it under the clips used for cradle attachment.
Version 7a/ May 2010 Page 30/36
To Next Page
Loading...
