MSA G1 SCBA - Page 33

33
Donning
G1 SCBA 2018 Edition
US
(4) Connect the waist belt, and pull forward on the waist strap
pull tabs to tighten the belt for a snug fit.
NOTE: Most of the SCBA weight should be carried on the hips.
(5) Attach the chest strap buckle (optional). If necessary,
tighten the chest strap.
(6) Stand up straight.
(7) Pull down on the shoulder strap pull tabs to tighten the
straps.
(8) If necessary, adjust the waist belt.
(9) Do the following to adjust the lumbar pad while wearing
the SCBA:
a) Loosen or release the waist buckle.
b) Reach behind to find the lumbar pad.
c) Pull the adjustment lever towards the body, and push up
or down, according to the adjustment needed.
d) Release the adjustment lever, and pull up or down to
make sure the lumbar pad is locked in position.
(10) Safety the shoulder straps and waist strap ends.
Shoulder straps and waist strap ends must lay flat across
the body.