MSA G1 SCBA - After Doffing

61
After Use
G1 SCBA 2018 Edition
US
10.3 After Doffing
(1) Do the procedures in Section 12.4 "Changing the Cylinder" to replace the cylinder with one that
is fully charged.
(2) Do the cleaning and disinfecting procedures in Section 11 "Cleaning and Disinfecting the SCBA".
(3) Do the inspection procedures in Section 4 "Visual Inspections".
(4) Make sure the complete SCBA is clean and dry.
(5) Make sure the head harness straps for the facepiece and the harness adjustment straps are fully
extended.
(6) Put the complete SCBA in the storage case or an approved storage location for easy access
during emergency conditions. Refer to Section 19 "Safekeeping and Storage".
(3) Grip the front of the facepiece (as shown) and pull the
facepiece away and down from the user.